Overview
Easily add anti-slip protection to paths, patios and driveways by adding this additive into your chosen finish. Highly suitable for use with other Thompsons products such as their Patio & Block Paving Seal. Provide extra grip to surfaces to stop them from becoming slippery in the rain, snow or ice.
- Can be added to chosen topcoat
- Easy to use
- Quick drying - 4 hours
- Invisable anti slip finish
- High level of coverage
Can be used with or .
Area | Exterior |
Recommended Use | All bare or previously treated patio, block paving including granite, cast, limestone and sandstone. |
Coverage | 200g can cover Up to 15m² depending on product added to |
Drying Time | 4 hours for light foot traffic, 24 hours for heavy foot traffic |
Re-Coat Time | As instructed by product added to |
Recommended Coats | 1-2 Coats |
Application Method | Roller |
Clean Up | Clean brushes, rollers and any other equipment immediately after use with white spirit or paint brush cleaner. |
Preparation
To prepare the surface always follow the instructions for preparation on the finishing coat packaging.
Application
Always perform a test on a small inconspicuous area to ensure compatibility, and always follow the manufacturer's instructions found on the packaging.
- One 200g pack can be added to 5 litres of .
- Pour directly into the Patio & Block Paving Seal in a container.
- Stir well so that all the beads disperse.
- Apply a final coat onto your patio using a long pile roller.
- Apply in long smooth strokes and allow to dry for 4 hours.
- Apply 1 coat when using Thompsons Patio & Block Paving Seal Wet Look and 2 coats with Thompsons Patio & Block Paving Seal Satin.